Skip To Content

Wire Edm Fabrication of Die Blocks

Wire EDM Fabrication of Die Blocks

At JB Tool, Die & Engineering, Inc. we have the ability to produce dies with extremely close tolerance patterns. This die block project for a customer in the automotive industry required these skills. Using our wire EDM capabilities, we produced the die blocks from 1-¼” thick A2 and D2 tool steels, following the specifications set by the customer. We worked to tolerances of ±.0001″ and produced a variety of die blocks. As a finish we applied titanium nitride to harden and protect the surface of the die blocks. After inspecting the components for any flaws, we performed testing to verify that they met the required standards.

With 50 years of experience in tool and die making, JB Tool is a leader in the industry. If you would like more information on our wire EDM fabrication services, please contact us today.

Wire Edm Fabrication of Die Blocks Project Highlights

Capabilities Applied/Processes
(Machining, Molding, Welding, etc...)
Wire EDM
Jig Grinding
Surface Grinding
Heat Treating
Tightest Tolerance+/- .0001"
Material TypeA2 and D2 Tool Steels
Material Thickness 1 ¼"
Material Finish
(Paint, Plating, Powder Coating, etc...)
Titanium Nitride
Secondary Operations AppliedMachining, Inspection and Product
Verification through Testing
Industry for UseAutomotive
Standards Met
(Customer Supplied Print, ISO, ASTM, etc...)
ANSI, Customer Specifications
Product NameDie Blocks
Design Work
(CAD Modeling, FEA, etc...)
CAD Modeling